Lockwood code change

LOCKSMITHS "The perfect combination of quality and service"

STEP: 2

SETTING A NEW CODE Please read the instructions carefully before re-coding If necessary, the factory-set five-digit code can be changed easily to a new four, five or six character code of your choice, by following the steps below.

STEP: 1 SELECT YOUR NEW CODE

Use any combination of numbers (0-9) or letters X, Y or Z as a four-, five- or six-character code. Each character can only be used once in a code NOTE: Button 'C' is used for clearing the code selector mechanism and cannot be changed.

PREPARE LOCK FOR RE-CODING

(a) Remove adaptor plate (where fitted) (b) Remove four red screws and carefully remove backplate

SETTING YOUR NEW CODE

(a) Hold button ‘C’ depressed on the front face while repossioning the tumblers. (b) Using the tweezers supplied, reposition red and blue tumblers as follows

RED TUMBLERS are located in holes corresponding to the new code. eg. a four-character code required four red tumblers. (Where necessary, use spare tumblers from the plastic wallet supplied.) BLUE TUMBLERS are located in all remaining holes.

STEP: 4

TO RE-ASSEMBLE

Replace the backplate carefully and secure it with the four red screws.

Select a new web site page from the Main Menu at the top of this screen

4/9 Spongolite Street Beard ACT 2620 Australia (02) 6299-6134 Mobile: 0418 626 310

STEP: 2

STEP: 1 SELECT YOUR NEW CODE

PREPARE LOCK FOR RE-CODING

(a) Remove adaptor plate (where fitted) (b) Remove four red screws and carefully remove backplate

SETTING YOUR NEW CODE

(a) Hold button ‘C’ depressed on the front face while repossioning the tumblers. (b) Using the tweezers supplied, reposition red and blue tumblers as follows

STEP: 4

TO RE-ASSEMBLE

Replace the backplate carefully and secure it with the four red screws.

LOCKSMITHS "The perfect combination of quality and service"

Select a new web site page from the Main Menu at the top of this screen

4/9 Spongolite Street Beard ACT 2620 Australia (02) 6299-6134 Mobile: 0418 626 310

Use any combination of numbers (0-9) or letters X, Y or Z as a four-, five- or six-character code.

OPERATING INSTRUCTIONS

Press button “C” to clear the lock mechanism Enter the code and rotate the turn knob to unlock.

STEP: 1 SELECT YOUR NEW CODE

STEP: 2 PREPARE LOCK FOR RE-CODING Keep lock horizontal while changing code (a) Remove adaptor plate (where fitted) (b) Remove four red screws and carefully remove backplate

see illustration below

SETTING YOUR NEW CODE

(a) Hold button ‘C’ depressed on the front face while repossioning the tumblers. (b) Using the tweezers supplied, reposition red and blue tumblers as follows.

STEP: 4

TO RE-ASSEMBLE

Replace the backplate carefully and secure it with the four red screws.

“The Perfect Combination of Quality and Service” Select a new web site page from the Main Menu at the top of this screen

4/9 Spongolite Street Beard ACT 2620 Australia (02) 6299-6134 Mobile: 0418 626 310

“The Perfect Combination of Quality and Service” Website design & construction by Interstellar - copyright 2004-2022

OPERATING INSTRUCTIONS

Press button “C” to clear the lock mechanism Enter the code and rotate the turn knob to unlock.

SETTING A NEW CODE Please read the instructions carefully before re-coding. If necessary, the factory-set five-digit code can be changed easily to a new four, five or six character code of your choice, by following the steps below.

NOTE: Button 'C' is used for clearing the code selector mechanism and cannot be changed.

STEP: 2 PREPARE LOCK FOR RE-CODING Keep lock horizontal while changing code (a) Remove adaptor plate (where fitted) (b) Remove the four red screws and carefully remove the backplate.

see illustration below

SETTING YOUR NEW CODE

(a) Hold button ‘C’ depressed on the front face while repositioning the tumblers. (b) Using the tweezers supplied, reposition the red and blue tumblers as follows.